We Say
Gtechniq G1 is a durable glass coating designed for long lasting protection. Water rolls off the glass with ease making driving in the rain safer also cleaning the glass is made much easier thanks to G1's impressive repellent properties.
Key Features
Beading10/10(Compared To Others)
Durability12 Months(Or 20,000 Miles)
Runoff Threshold50 mph(When Glass Is Clean)
Description
Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability. G1 ClearVision Smart Glass is extremely durable, the hydrophobic function improves wet weather visibility helping to improve safety and eye strain. It also makes removing contaminants from the glass such as ice, bugs and tree sap much easier. G1 will only work on glass substrates and so, it will not work on modern headlight lenses which are made from polycarbonate. For these you will need to use G5 Water Repellent for Glass and Perspex. Choose the 15ml bottle for windscreens only, but the 100ml bottle if looking to use on all of your car’s glass. G1 is supplied with G2 Residue Remover.
Specification
| Adds Protection | Yes |
|---|---|
| Application Method | By hand only |
| Beading | |
| Dangerous Goods | Y |
| Durability | 12 months |
| Emits Strong Fumes | Yes |
| Layerable | Yes |
| Runoff Threshold | 50 mph |
| Size | 15 ml Kit |
| Slickness | |
How To Use
Ensure you are working in a well ventilated area, out of direct sunlight and wearing gloves. Also ensure temperature is 5c or above. Clean all glass before application using G6 Perfect Glass. For best results use G4 Glass Polish to ensure the glass is perfectly prepped. Shake G1 well and apply a liberal amount to a AP1 Lint Free Applicator. For windscreens we recommend applying 3 layers but only 1 layer on side and rear windows. Work G1 into the glass in circular motions, covering all glass and allow to cure for 5 minutes. Using a new AP1 applicator, apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure. Apply your third layer with the same amount of product on a AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes. Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth. Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5. We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced. Do not expose your car to the elements for at least 3 hours.
